Installing Kitchen Cabinets No Studs

Procedure Place The Plywood.

Installing Kitchen Cabinets No Studs. Also screw the cabinets to the pantry cabinet if possible. The screw leaves behind an open hole for you to use when installing the brackets. Keep a small container nearby to drop the screws in while youre working.

Since the toggles are digging into the expanded metal which is tied to the studs this should be fine. Hello DIY friends Today we will teach you How To Add Cabinet Wall Blocking To Stud Walls for your Kitchen Cabinet Installation and you will do it yourself. On framed cabinets drill holes for 1 14-inch drywall screws in the recesses for the.

The problem is that there are no studs on the wall we are working with. Use a compass to scribe a line following the contours of the wall and cut at a 7- to 10-degree bevel. Run 3 inch screws through the back of the cabinet into the plywood panel hitting the stud whenever possible making sure to run screw through the horizontal installation cleats in the back of the unit.

Make the cuts shallow so theyre no deeper than the drywall to avoid hitting any electrical or plumbing lines. Prop cabinet in place right where you want it take your drill and poke through the already drilled holes. Take cabinet down and install 10 molly anchors in holes you marked.

Drill 316 holes in cabinet back Id probably use three two up top and one bottom. Cut the molding with a miter saw to the appropriate angle. Screws spaced about every foot.

Outline the cabinet with a pencil. Installing base cabinet with no studs. The problem is the properly part as there is some skill in drilling the correct size hole and not tearing up the paper on the back of the drywall.